Winston Industries OF59C Operations Instructions download pdf (Page 34)

Collectramatic

Fryers - 8000 Series Control - OF49C, OF59C, PF46C, PF56C - KFC

www.winstonind.com

800-234-5286

PROGRAMMING

8000 Series Computer Controller

For Collectramatic

Open and

Pressure Fryers

Models OF49C, OF59C,

PF46C, PF56C

STEP 10

STEP 11

STEP 12

STEP 13

Return to STEP 6 and repeat through STEP 13 until programming is complete.

Note: At any time during programming time settings can be set to :00 indicating

from that point on, the fryer will cook at the last setting entered until the end of the

cycle.

Current time

setting sample

Current vent

setting sample

Programming the AutoCool Mode Timer

Automatic cool mode monitors the amount of time the fryer remains in drop mode. If

the fryer is in drop mode, without cooking, for the programmed amount of time (in

STEP 8 below) the controller will switch to cool mode.

STEP 1 In sequence, press the following buttons to enter programming mode.

then then then then

STEP 2

STEP 3

STEP 4

When the computer

displays Press button/Action

Note

Indicates Programming

mode. Press #4 to

proceed.

Program automatic cool

mode parameters. Press

ENTER to proceed.

CH displays momentarily.

Use arrow buttons to

modify. Hold either button

for fast scrolling. Display

shows MM:SS

(minutes:seconds).

:00 minimum

99:55 maximum.

Press ENTER to proceed.

Use arrow button to

toggle between Open (O)

and Pressure (P).

Controller proceeds to

next heat setpoint

(repeats starting at

STEP 6). If at final

pressure setting, program

mode exit.

ENTER

PROG

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

Comments to this Manuals

No comments

Winston Industries OF59C Operations Instructions Page 34

Comments to this Manuals

Related products and manuals for Deep fryers Winston Industries OF59C